Smartgen HGM7210CAN power station automation controllers integrate digitization, intelligentization and network technology which are used for genset automation and monitor control system of single diesel unit to achieve remote start/stop, data measurement, alarm protection and etc. functions. It fit with LCD display, optional languages interface (Chinese, English and etc.), and it is reliable and easy to use.
Power Supply:DC(8-35)V
Case Dimensions:209*116*45(mm)
Operating Temp. :(-25~+70)℃
Weight:0.6kg
CHARACTERISTICS for HGM7210CAN Smartgen Controller:
Operating Voltage
DC8.0V to DC35.0V, Continuous Power Supply.
Power Consumption
<4W (standby ≤2W)
Alternator Volt Input Range 3Phase 4Wire 3Phase 3Wire Single Phase 2Wire 2Phase 3Wire
15V AC - 360 V AC (ph-N) 30V AC - 620 V AC (ph-ph) 15V AC - 360 V AC (ph-N) 15V AC - 360 V AC (ph-N)
Alternator Frequency
50 Hz/60Hz
Speed sensor voltage
1.0V to 24.0V (RMS)
Speed sensor Frequency
10,000 Hz (max.)
Starter Relay Output
16 A 28V DC at supply output
Fuel Relay Output
16 A 28VDC at supply output
Programmable Relay Output 1
7A 28V DC power supply output
Programmable Relay Output 2
8A 250V AC volt free output
Programmable Relay Output 3
16A 250V AC volt free output
Programmable Relay Output 4
16A 250V AC volt free output
Programmable Relay Output 5
7A 28V DC power supply output
Programmable Relay Output 6
7A 28V DC power supply output
Case Dimension
209mm x 166mm x 45mm
Panel Cutout
186mm x 141mm
CT Secondary Current
5A rated
Working Conditions
Temperature: (-25~+70)°C; Humidity: (20~93)%
Storage Condition
Temperature: (-25~+70)°C
Protection Level
IP65 Front panel
Insulating Intensity
Apply AC2.2kV voltage between high voltage terminal and low voltage terminal; The leakage current is not more than 3mA within 1min.