• ESD5570E Engine Electric Speed Governor Generator Speed Control Unit Diesel Genset Spare Parts - XFH generator parts
  • ESD5570E Engine Electric Speed Governor Generator Speed Control Unit Diesel Genset Spare Parts - XFH generator parts
  • ESD5570E Engine Electric Speed Governor Generator Speed Control Unit Diesel Genset Spare Parts - XFH generator parts
1 4

ESD5570E Engine Electric Speed Governor Generator Speed Control Unit Diesel Genset Spare Parts

ESD5570E Engine Electric Speed Governor Generator Speed Control Unit Diesel Genset Spare Parts

Test before shippment, 1 year warranty, pay safe with PayPal. Free Shipping to 63 countries.

$57.98
$57.98
ํ• ์ธ ํ’ˆ์ ˆ
๋ฐฐ์†ก๋ฃŒ๋Š” ๊ฒฐ์ œ ์‹œ ๊ณ„์‚ฐ๋ฉ๋‹ˆ๋‹ค.

Description

The Esd5550/5570 Series speed control unit is an all electronic device designed to control engine speed with fast and precise response transient load changes.

(PER5570E is designed for CUMMINS EFC series.)

Isochronous Operation/Steady Stability-----+/-0.25% or better

Supply-----12 or 24 VDC Battery Systems(transient&reverse voltage protected)

Power Consumption-----50 ma continuous plus acutator current

Maximum Actuator Current at 25ยบC(77ยบF)-----10 Amps continuous

Technical Data:

Input Supply 12 or 24 VDC Battery System (Transient and Reverse Voltage)
Polarity Negative Ground (Case Isolated)
Power Consumption 50 ma continuous plus actuator current
Actuator Current Range @77ยฐF (25 ยฐC) - (Inductive Load) Min.2.5 Amps; Max. 10Amps continuous
Speed Sensor Signal 0.5-120 Volts RMS
Speed switch Relay contacts(N.O.and N.C) 10 Amps ( Rated power is biger than ESD5500)
Performance Isochronous Operation/Steady State Stability ยฑ0.25% or better
Speed Range/Governor 1K to 7.5K Hz continuous
Speed Drift with Temperature ยฑ1% Max
Idle Adjust CW 60% of set speed
Idle Adjust CCW Less than 1200 Hz.
Droop Range 1-5% regulation
Droop Adj. Max. (K-L Jumpered) 400 Hz., ยฑ75Hz. Per 1.0A change
Droop Adj. Min. (K-L Jumpered) 15Hz., ยฑ6Hz. Per 1.0A change
Speed Trim Range ยฑ200 Hz
Remote Variable Speed Range 500 - 7.5 Hz. Or any part there of Terminal Sensitivity
Terminal Sensitivity J 100 Hz., ยฑ 15Hz / Volt @ 5.0 K Impedance
Terminal Sensitivity L 735 Hz., ยฑ60 Hz / Volt @ 65 K Impedance
Terminal Sensitivity N 148 Hz., ยฑ10 Hz / Volt @ 1 Meg. Impedance
Terminal Sensitivity P 10 VDC Supply @ 20 ma Max
Speed witch adjustment range 1000-10000HZ
Environmental Ambient Operating Temperature Range -40 to +180ยฐF(-40ยฐ+85 ยฐC)
Relative Humidity Up to 95%
All Surface Finishes Fungus Proof and Corrosion Resitant
Reliability Vibration 1G @ 20 to 100 Hz.
Testing 100% Functionally Tested
physical Dimensions See outline (FIGURE 1)
Weigh1 1.8 lbs.(820 grams)
Mounting Any position, Vertical Preferred
์ „์ฒด ์„ธ๋ถ€ ์ •๋ณด ๋ณด๊ธฐ

Collections

Send Inquiries