Test before shippment, 1 year warranty, pay safe with PayPal. Free Shipping to 63 countries.
์ ๊ฐ
$79.99
์ ๊ฐ
ํ ์ธ๊ฐ
$79.99
๋จ๊ฐ
/
๋จ์
ํ ์ธ
ํ์
ํฝ์
์ฌ์ฉ ๊ฐ๋ฅ ์ฌ๋ถ๋ฅผ ๋ก๋ํ ์ ์์ต๋๋ค.
The 650-045 Printed Circuit Board for gensets OLYMPLAN-MASSEY FERGUSON 24V.
Ensure the MPU (Magnetic Pickup) is installed correctly.
Unscrew and pull out the magnetic pickup that is located near the flywheel of the engine
ย Inspect the magnetic tip and ensure that it is clean and free of debris.
Screw the MPU in until the tip makes contact with the top of the flywheel teeth.
ย Back out the magnetic pickup ยฝ to ยพ of a turn.
EIM (Engine Interface Module)
Turn the ten-turn potentiometer between five to seven turns clockwise or just until you feel a small click - signifying the full span of the pot.
Start the generator set. You will notice the overspeed calibration LED illuminated.
Slowly turn the potentiometer counter-clockwise until the LED just turns off.
As soon as the LED turns off, start to slowly turn back the potentiometer clockwise just until the led starts to flicker.
Share
์ ์ฒด ์ธ๋ถ ์ ๋ณด ๋ณด๊ธฐ