Product Introduction
The DSE6110 is an Auto Start Control Module and the DSE6120 is
an Auto Mains (Utility) Failure Control Module suitable for a wide variety of single gen-set applications.
Monitoring speed, frequency,voltage, current, oil pressure, coolant temperature and fuel level, the modules will display warnings, shutdown and engine status information on the back-lit LCD screen and illuminated LED.
Key Features
โข Back-lit text LCD display
โข Front panel editing
โข LED and LCD alarm indication
โข Power Save mode
โข CAN and Magnetic Pick-up/Alt.versions available (specify on
ordering)
โข PC and front panel configuration
โข 6 Digital inputs
โข 3 Analogue inputs
โข 6 Outputs (4 configurable on Magnetic Pick-up/Alt., 6
configurable on CAN version)
โข Configurable timers and alarms
โข Alternative configuration
โข Event Log (10)
โข Remote Start input
โข 3 Phase generator monitoring
โข Current Monitoring and protection โข 3 Phase Mains (Utility) monitoring
(DSE6120 only)
โข Test button (DSE6120 only)
โข Battery voltage monitoring
โข Engine pre-heat
โข Hours counter
โข Comprehensive shutdown or warning on fault condition
Specification
CONTINUOUS VOLTAGE RATING๏ผ8 to 35 Vdc Continuous
CRANKING DROPOUTS๏ผAble to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries.LEDs and backlight will not be maintained during cranking.
MAXIMUM OPERATING CURRENT๏ผ 178 mA at 12 V, 95 mA at 24 V
MAXIMUM STANDBY CURRENT๏ผ88 mA at 12 V, 50 mA at 24 V
MAINS (UTILITY) DSE6120 ONLY
VOLTAGE RANGE๏ผ15 V - 333 V AC (L-N)
FREQUENCY RANGE๏ผ3.5 Hz to 75 Hz
WORKING TEMPERATURE RANGE๏ผ-40 oC to +85 oC
ย